10 mg vial + 1.5 mL bacteriostatic water: units chart
A 10 mg vial mixed with 1.5 mL of bacteriostatic water holds 6,666.67 mcg per mL. This is a middle-strength mix: each unit holds 66.67 mcg, so most doses in the table land between 2 and 100 units on a 1 mL syringe.
Units to draw
3.8units
Draw 3.8 units on a U-100 syringe, just below the 4-unit mark.
- Dose
- 250 mcg (0.25 mg)
- Volume
- 0.038 mL
- Concentration
- 6,666.67 mcg/mL (6.66667 mg/mL)
- Per unit
- 66.67 mcg (0.06667 mg)
- Full doses in vial
- 40
Show the math
- Convert the vial amount to mcgmg × 1,000 = mcg10 mg × 1,000 = 10,000 mcg
- Convert the dose to mcgmg × 1,000 = mcg0.25 mg × 1,000 = 250 mcg
- Concentrationvial (mcg) ÷ water (mL) = mcg per mL10,000 mcg ÷ 1.5 mL = 6,666.67 mcg/mL (6.66667 mg/mL)
- Volume to drawdose (mcg) ÷ concentration (mcg/mL) = mL250 mcg ÷ 6,666.67 mcg/mL = 0.0375 mL
- Units to drawmL × units per mL = units0.0375 mL × 100 units/mL = 3.8 units
- Amount in each unitmcg per mL ÷ units per mL = mcg per unit6,666.67 mcg/mL ÷ 100 units/mL = 66.67 mcg per unit (0.06667 mg)
- Doses in the vialvial (mcg) ÷ dose (mcg), rounded down10,000 mcg ÷ 250 mcg = 40 full doses
10 mg peptide with 1.5 mL bac water: units chart
Units to draw on a 1 mL U-100 syringe for common doses, calculated by this site. With this mix, the chart doses from 150 mcg to 2,000 mcg are easy to read and fit one 1 mL syringe. The 2 smallest doses are under 2 units.
| Dose | Units (U-100) | Volume (mL) |
|---|---|---|
| 50 mcg | 0.8hard to measure | 0.0075 |
| 100 mcg | 1.5hard to measure | 0.015 |
| 150 mcg | 2.3 | 0.0225 |
| 200 mcg | 3 | 0.03 |
| 250 mcg | 3.8 | 0.0375 |
| 300 mcg | 4.5 | 0.045 |
| 400 mcg | 6 | 0.06 |
| 500 mcg | 7.5 | 0.075 |
| 600 mcg | 9 | 0.09 |
| 750 mcg | 11.3 | 0.1125 |
| 1,000 mcg1 mg | 15 | 0.15 |
| 1,250 mcg1.25 mg | 18.8 | 0.1875 |
| 1,500 mcg1.5 mg | 22.5 | 0.225 |
| 2,000 mcg2 mg | 30 | 0.3 |
Key numbers for this mix
- Peptide in the vial
- 10,000 mcg
- Concentration
- 6,666.67 mcg/mL
- Each unit on a U-100 syringe
- 66.67 mcg
- Each unit on a U-40 syringe
- 166.67 mcg
- Smallest easy-to-measure dose (2 units)
- 133.33 mcg
- Most that fits in a 1 mL syringe
- 6,666.67 mcg
Worked example: 600 mcg
- Convert the vial amount to mcg: 10 mg × 1,000 = 10,000 mcg
- Concentration: 10,000 mcg ÷ 1.5 mL = 6,666.67 mcg/mL (6.66667 mg/mL)
- Volume to draw: 600 mcg ÷ 6,666.67 mcg/mL = 0.09 mL
- Units to draw: 0.09 mL × 100 units/mL = 9 units
- Amount in each unit: 6,666.67 mcg/mL ÷ 100 units/mL = 66.67 mcg per unit (0.06667 mg)
- Doses in the vial: 10,000 mcg ÷ 600 mcg = 16 full doses
Draw 9 units on a U-100 syringe, halfway between the 8- and 10-unit marks. The same 600 mcg dose is 6 units with 1 mL of water and 12 units with 2 mL of water, compared with 9 units with 1.5 mL.
Frequently asked questions
What is the concentration of a 10 mg vial with 1.5 mL of water?
A 10 mg vial mixed with 1.5 mL of water holds 6,666.67 mcg per mL. Each unit on a U-100 syringe holds 66.67 mcg.
How many units is 600 mcg with a 10 mg vial and 1.5 mL of water?
It is 9 units on a U-100 syringe, which is 0.09 mL of the mixed liquid.
What is the smallest dose you can measure well with a 10 mg vial and 1.5 mL of water?
About 133.33 mcg, which fills 2 units on a U-100 syringe. Smaller amounts are hard to read; a vial mixed with more water spreads them over more units.
What is the largest dose that fits a 1 mL syringe with a 10 mg vial and 1.5 mL of water?
6,666.67 mcg, which fills all 100 units of a 1 mL U-100 syringe. Larger doses need more than one draw or a stronger mix.
How many doses does a 10 mg vial with 1.5 mL of water give?
Divide 10,000 mcg by your dose and round down: 16 full doses of 600 mcg, or 13 of 750 mcg.
Nearby vial and water combinations
- Less water: 10 mg + 1 mL
- More water: 10 mg + 2 mL
- Smaller vial: 6 mg + 1.5 mL
- Larger vial: 12 mg + 1.5 mL
See all reconstitution charts, or use the peptide calculator for any other vial, water or dose. For the reasoning behind these numbers, read Peptide Reconstitution Formula, Explained Step by Step.