15 mg vial + 2.5 mL bacteriostatic water: units chart
A 15 mg vial mixed with 2.5 mL of bacteriostatic water holds 6,000 mcg per mL. This is a middle-strength mix: each unit holds 60 mcg, so most doses in the table land between 2 and 100 units on a 1 mL syringe.
Units to draw
4.2units
Draw 4.2 units on a U-100 syringe, just above the 4-unit mark.
- Dose
- 250 mcg (0.25 mg)
- Volume
- 0.042 mL
- Concentration
- 6,000 mcg/mL (6 mg/mL)
- Per unit
- 60 mcg (0.06 mg)
- Full doses in vial
- 60
Show the math
- Convert the vial amount to mcgmg × 1,000 = mcg15 mg × 1,000 = 15,000 mcg
- Convert the dose to mcgmg × 1,000 = mcg0.25 mg × 1,000 = 250 mcg
- Concentrationvial (mcg) ÷ water (mL) = mcg per mL15,000 mcg ÷ 2.5 mL = 6,000 mcg/mL (6 mg/mL)
- Volume to drawdose (mcg) ÷ concentration (mcg/mL) = mL250 mcg ÷ 6,000 mcg/mL = 0.0417 mL
- Units to drawmL × units per mL = units0.0417 mL × 100 units/mL = 4.2 units
- Amount in each unitmcg per mL ÷ units per mL = mcg per unit6,000 mcg/mL ÷ 100 units/mL = 60 mcg per unit (0.06 mg)
- Doses in the vialvial (mcg) ÷ dose (mcg), rounded down15,000 mcg ÷ 250 mcg = 60 full doses
15 mg peptide with 2.5 mL bac water: units chart
Units to draw on a 1 mL U-100 syringe for common doses, calculated by this site. With this mix, the chart doses from 150 mcg to 2,000 mcg are easy to read and fit one 1 mL syringe. The 2 smallest doses are under 2 units.
| Dose | Units (U-100) | Volume (mL) |
|---|---|---|
| 50 mcg | 0.8hard to measure | 0.0083 |
| 100 mcg | 1.7hard to measure | 0.0167 |
| 150 mcg | 2.5 | 0.025 |
| 200 mcg | 3.3 | 0.0333 |
| 250 mcg | 4.2 | 0.0417 |
| 300 mcg | 5 | 0.05 |
| 400 mcg | 6.7 | 0.0667 |
| 500 mcg | 8.3 | 0.0833 |
| 600 mcg | 10 | 0.1 |
| 750 mcg | 12.5 | 0.125 |
| 1,000 mcg1 mg | 16.7 | 0.1667 |
| 1,250 mcg1.25 mg | 20.8 | 0.2083 |
| 1,500 mcg1.5 mg | 25 | 0.25 |
| 2,000 mcg2 mg | 33.3 | 0.3333 |
Key numbers for this mix
- Peptide in the vial
- 15,000 mcg
- Concentration
- 6,000 mcg/mL
- Each unit on a U-100 syringe
- 60 mcg
- Each unit on a U-40 syringe
- 150 mcg
- Smallest easy-to-measure dose (2 units)
- 120 mcg
- Most that fits in a 1 mL syringe
- 6,000 mcg
Worked example: 600 mcg
- Convert the vial amount to mcg: 15 mg × 1,000 = 15,000 mcg
- Concentration: 15,000 mcg ÷ 2.5 mL = 6,000 mcg/mL (6 mg/mL)
- Volume to draw: 600 mcg ÷ 6,000 mcg/mL = 0.1 mL
- Units to draw: 0.1 mL × 100 units/mL = 10 units
- Amount in each unit: 6,000 mcg/mL ÷ 100 units/mL = 60 mcg per unit (0.06 mg)
- Doses in the vial: 15,000 mcg ÷ 600 mcg = 25 full doses
Draw to the 10-unit mark on a U-100 syringe. The same 600 mcg dose is 8 units with 2 mL of water and 12 units with 3 mL of water, compared with 10 units with 2.5 mL.
Frequently asked questions
What is the concentration of a 15 mg vial with 2.5 mL of water?
A 15 mg vial mixed with 2.5 mL of water holds 6,000 mcg per mL. Each unit on a U-100 syringe holds 60 mcg.
How many units is 600 mcg with a 15 mg vial and 2.5 mL of water?
It is 10 units on a U-100 syringe, which is 0.1 mL of the mixed liquid.
What is the smallest dose you can measure well with a 15 mg vial and 2.5 mL of water?
About 120 mcg, which fills 2 units on a U-100 syringe. Smaller amounts are hard to read; a vial mixed with more water spreads them over more units.
What is the largest dose that fits a 1 mL syringe with a 15 mg vial and 2.5 mL of water?
6,000 mcg, which fills all 100 units of a 1 mL U-100 syringe. Larger doses need more than one draw or a stronger mix.
How many doses does a 15 mg vial with 2.5 mL of water give?
Divide 15,000 mcg by your dose and round down: 25 full doses of 600 mcg, or 20 of 750 mcg.
Nearby vial and water combinations
- Less water: 15 mg + 2 mL
- More water: 15 mg + 3 mL
- Smaller vial: 12 mg + 2.5 mL
- Larger vial: 20 mg + 2.5 mL
See all reconstitution charts, or use the peptide calculator for any other vial, water or dose. For the reasoning behind these numbers, read Peptide Reconstitution Formula, Explained Step by Step.