20 mg vial + 1.5 mL bacteriostatic water: units chart
A 20 mg vial mixed with 1.5 mL of bacteriostatic water holds 13,333.33 mcg per mL. This is a strong mix: each unit holds 133.33 mcg, so small doses take up only a few units and are harder to measure. More water would spread them out.
Units to draw
1.9units
Draw 1.9 units on a U-100 syringe, just below the 2-unit mark.
Warning: At 1.9 units this dose is hard to measure. Add more water when you mix the vial so the dose fills at least 2 units.
- Dose
- 250 mcg (0.25 mg)
- Volume
- 0.019 mL
- Concentration
- 13,333.33 mcg/mL (13.33333 mg/mL)
- Per unit
- 133.33 mcg (0.13333 mg)
- Full doses in vial
- 80
Show the math
- Convert the vial amount to mcgmg × 1,000 = mcg20 mg × 1,000 = 20,000 mcg
- Convert the dose to mcgmg × 1,000 = mcg0.25 mg × 1,000 = 250 mcg
- Concentrationvial (mcg) ÷ water (mL) = mcg per mL20,000 mcg ÷ 1.5 mL = 13,333.33 mcg/mL (13.33333 mg/mL)
- Volume to drawdose (mcg) ÷ concentration (mcg/mL) = mL250 mcg ÷ 13,333.33 mcg/mL = 0.0188 mL
- Units to drawmL × units per mL = units0.0188 mL × 100 units/mL = 1.9 units
- Amount in each unitmcg per mL ÷ units per mL = mcg per unit13,333.33 mcg/mL ÷ 100 units/mL = 133.33 mcg per unit (0.13333 mg)
- Doses in the vialvial (mcg) ÷ dose (mcg), rounded down20,000 mcg ÷ 250 mcg = 80 full doses
20 mg peptide with 1.5 mL bac water: units chart
Units to draw on a 1 mL U-100 syringe for common doses, calculated by this site. With this mix, the chart doses from 300 mcg to 2,000 mcg are easy to read and fit one 1 mL syringe. The 5 smallest doses are under 2 units.
| Dose | Units (U-100) | Volume (mL) |
|---|---|---|
| 50 mcg | 0.4hard to measure | 0.0038 |
| 100 mcg | 0.8hard to measure | 0.0075 |
| 150 mcg | 1.1hard to measure | 0.0113 |
| 200 mcg | 1.5hard to measure | 0.015 |
| 250 mcg | 1.9hard to measure | 0.0188 |
| 300 mcg | 2.3 | 0.0225 |
| 400 mcg | 3 | 0.03 |
| 500 mcg | 3.8 | 0.0375 |
| 600 mcg | 4.5 | 0.045 |
| 750 mcg | 5.6 | 0.0563 |
| 1,000 mcg1 mg | 7.5 | 0.075 |
| 1,250 mcg1.25 mg | 9.4 | 0.0938 |
| 1,500 mcg1.5 mg | 11.3 | 0.1125 |
| 2,000 mcg2 mg | 15 | 0.15 |
Key numbers for this mix
- Peptide in the vial
- 20,000 mcg
- Concentration
- 13,333.33 mcg/mL
- Each unit on a U-100 syringe
- 133.33 mcg
- Each unit on a U-40 syringe
- 333.33 mcg
- Smallest easy-to-measure dose (2 units)
- 266.67 mcg
- Most that fits in a 1 mL syringe
- 13,333.33 mcg
Worked example: 1,250 mcg
- Convert the vial amount to mcg: 20 mg × 1,000 = 20,000 mcg
- Concentration: 20,000 mcg ÷ 1.5 mL = 13,333.33 mcg/mL (13.33333 mg/mL)
- Volume to draw: 1,250 mcg ÷ 13,333.33 mcg/mL = 0.0938 mL
- Units to draw: 0.0938 mL × 100 units/mL = 9.4 units
- Amount in each unit: 13,333.33 mcg/mL ÷ 100 units/mL = 133.33 mcg per unit (0.13333 mg)
- Doses in the vial: 20,000 mcg ÷ 1,250 mcg = 16 full doses
Draw 9.4 units on a U-100 syringe, between the 8- and 10-unit marks, closer to 10. The same 1,250 mcg dose is 6.3 units with 1 mL of water and 12.5 units with 2 mL of water, compared with 9.4 units with 1.5 mL.
Frequently asked questions
What is the concentration of a 20 mg vial with 1.5 mL of water?
A 20 mg vial mixed with 1.5 mL of water holds 13,333.33 mcg per mL. Each unit on a U-100 syringe holds 133.33 mcg.
How many units is 1,250 mcg with a 20 mg vial and 1.5 mL of water?
It is 9.4 units on a U-100 syringe, which is 0.0938 mL of the mixed liquid.
What is the smallest dose you can measure well with a 20 mg vial and 1.5 mL of water?
About 266.67 mcg, which fills 2 units on a U-100 syringe. Smaller amounts are hard to read; a vial mixed with more water spreads them over more units.
What is the largest dose that fits a 1 mL syringe with a 20 mg vial and 1.5 mL of water?
13,333.33 mcg, which fills all 100 units of a 1 mL U-100 syringe. Larger doses need more than one draw or a stronger mix.
How many doses does a 20 mg vial with 1.5 mL of water give?
Divide 20,000 mcg by your dose and round down: 16 full doses of 1,250 mcg, or 13 of 1,500 mcg.
Nearby vial and water combinations
- Less water: 20 mg + 1 mL
- More water: 20 mg + 2 mL
- Smaller vial: 15 mg + 1.5 mL
- Larger vial: 24 mg + 1.5 mL
See all reconstitution charts, or use the peptide calculator for any other vial, water or dose. For the reasoning behind these numbers, read How Much Bacteriostatic Water to Add to a Vial.